Stainless Steel Fiber Laser Marking Machine Mark Photo On Steel

Through this video, you can see fiber laser marking machine marking photo on stainless steel. It can mark photo words and any designs you want. The mchine has software EZcad English version, easy operation. A new operator can learn how to use it within one day.

Different Types Of Fiber Laser Marking Machine

Fiber laser is divided into two categories: continuous fiber laser and pulse fiber laser. According to the power size: continuous 5W, 10W, 20W to 400W, 1000W or more; The pulse is 10W, 15W, 20W, 25W, 30W to 50W. Optical fiber laser marking machine is the most advanced laser marking equipment in the world. It has the characteristics of good beam quality, small volume, fast speed, long working life, flexible and convenient installation and maintenance free. It is widely used for the marking of graphics and words in many fields such as IC chips, computer accessories, industrial bearings, clocks, electronic and communication products, aerospace devices, various automotive parts, household appliances, hardware tools, moulds, wires and cables, food packaging, jewelry, tobacco and military affairs, as well as large-scale production line operations. Fiber laser, the latest in the world, has the most reliable structure, small volume (about 410 * 200 * 270mm), small power consumption, no high voltage and no large water cooling system (only about 300W), high beam quality, close to ideal beam, USB interface output control, optical scanning galvanometer, high repetition frequency of excitation and high speed and no distortion.

On And Offer Steps Of Fiber Laser Marking Machine

Check the waterway and circuit before starting. The startup sequence is as follows:

① Turn on the incoming power and turn on the key switch. At this time, the ventilation and refrigeration system of the machine is powered on, and the ammeter shows about 7a;

② Wait for 5-10 seconds, press the trigger button on the external control panel, and the ammeter displays zero. After 3-5 seconds, the krypton lamp lights up, and the ammeter displays 7a（ Refer to the operation manual of laser power supply);

③ Turn on the power supply of the galvanometer;

④ Turn on the computer and call out the required marking file;

⑤ Adjust the laser power supply to the working current (10 ~ 18a) to start marking;

At the end of marking, turn off the power of each component in reverse order as above:

① Adjust the working current of laser power supply to the minimum (about 7a);

② Turn off the computer;

③ Turn off the power of the galvanometer;

④ Press the stop button;

⑤ Turn off the key switch;

⑥ Disconnect the incoming power supply.

XDLASER offer fiber laser marking machines with different designs. The laser power is 20W 30W 50W optional.

Welcome to contact us for details:

info@xdlasers.com

Whatsapp: +86-15169026664

Skype/wechat: juliali01