Through this video, you can see 50W or 60W co2 laser marking machine marking on nonmetal materials. The laser power can be 50W 60W 80W 100W optional. The marking area is 200mm*200mm, 3000mm*300mm, 400mm*400mm optional.

German PRECITEC [Precutter] The main domestic cutting heads sold in China are ProCutter, ProCutterZoom, LightCutter and other series. Among them, different cutting heads can be adapted to different sensors, which leads to different BCS height adjustment series. Now the suitable Pule cutting heads ar

Laser welding machine is an equipment used for welding metal materials. It can be divided into handheld fiber laser welding machine, laser spot welding machine and automatic laser welding machine according to the welding mode. So what materials can laser welding machine weld?1. Carbon steelCarbon st

1. Connect the laser head to the fiber laser2. Install the cutting head of the connected optical fiber on the machine.3. Paste white adhesive tape on important positions such as collimating protective lens and focusing lens.4. Connect the cooling water circuit to the laser head.5. Turn on the water

The cutting speed of fiber laser cutting machine for sheet metal is a concern of many processing enterprises, because the cutting speed determines the production efficiency, that is to say, the faster the speed, the higher the overall output. This paper mainly explains the factors affecting the spee

Through this video, you can see the acrylic sheet wood sheet co2 laser cutting machine 6040, higher precision, stronger body. Whole life free technical support. The machine in video has working size 600mm*400mm. We also have 900mm*600mm, 1300mm*900mm,1300mm*2500mm and other sizes. Welcome to contact XDLASER for details.

Co2 laser cutting equipment is normally equipped with the following laser powers: 60W,80W,100W,150W,280W and 300W. How to choose co2 laser cutting equipment laser power? To know the question,we need to know the cutting ability of different laser powers. High power cuts better while low power engraves better, XD Laser

1. Good cutting quality. The width of the notch is narrow (generally 0.1-0.5mm), the accuracy is high (generally the error of hole center distance is 0.1-0.4mm, the error of contour dimension is 0.1-0.5mm), and the roughness of the notch surface is good (generally RA is 12.5-25) μ m) Generally, the