How To Maintain 4000 Watt Fiber Laser Cutting Machine?

Fiber laser cutting machine is a new type of laser, which outputs high energy density laser beam, then moves the laser beam irradiation position and automatic cutting through ultra-fine focusing spot lighting and numerical control system, and gathers the laser beam on the surface of the work piece to realize instantaneous melting and evaporation of the work piece. Compared with solid-state laser, fiber laser cutting machine has obvious advantages, and has gradually developed into an important development direction in high precision laser processing, lidar system, space technology, laser medicine and other fields. The price of fiber laser source is getting cheaper and cheaper, many factories can afford 4000 watt fiber laser cutting machine. If you buy 4000W fiber laser, you can get bigger cutting range: 0.5-22mm. By the way, the cutting speed is much higher than lower laser powers.

Following are the steps you need to follow to maintain your 4000 watt fiber laser cutting machine:

Daily maintenance details:

1. Check the water level of the chiller, which shall be above the green mark of water level 2 / 3.

2. Check whether the power line is damaged and other potential safety hazards.

3. Check whether each switch button is flexible.

4. Check the protective lens before starting up and keep it clean.

5. Check the cutting nozzle before light out to keep it clean and free of blockage.

6. Check whether the laser focus is in the center of the cutting nozzle.

7. Clean the ash layer and waste on the machine table before going off duty.

8. If the ambient temperature is lower than 0 ℃, please add antifreeze or drain the water from the laser water cooler to prevent the water from freezing and damaging the machine.

Weekly maintenance details:

1. Butter at least once a week and inject lubricating oil once a shift.

2. Disassemble the dust cover for inspection to ensure that the oil is injected in place.

3. Clean the cutting residue on the rack and keep the rack moving smoothly.

4. Clean the cooling filter screen of the cooling system and keep the cooling system in good working order.

Monthly maintenance details:

1. Clean the ash layer of the main control cabinet and the residues of the air conditioner to keep the heat dissipation of the control cabinet working normally.

2. Clean the water tank and replace the cooling water (deionized distilled water once in June and purified water once in February)

Replace the filter element once every six months.

The life time of 4000 watt fiber laser source is 100000 hours. That means, the laser source can almost use as long as the machine. If you maintain the machine well, you can use it longer. It is no problem for 7-8 years use.

If you are looking for laser cutting machines, welcome to send inquiry to XDLASER: info@xdlasers.com

Whatsapp: +86-15169026664