Publish Time: 2021-05-26 Origin: XDLASER
Laser cutting machine 100W is co2 laser cutting machine with 100W glass laser tube. It cuts nonmetal materials.
The 100W glass laser tube output laser power to the mirrors, the mirror reflect to the focus lens and focus all the laser power to one point in order to cut the materials.
It cuts the following materials:
Acrylic，architectural models,wood, MDF, bamboo,plywood, chipboard, die board, card borad, cloth, clothing,fabric,fur, jeans, plastic, plexi glass,leather, rubber plate,paper,, ABS, EPM, PE, PES, PUR, PVB, PVC, PUR, PMMA, PTFE,tile,marble,glass, jade. About acrylic, 100W can cut up to 20mm. About MDF, 100W can cut up to 8mm.
It is used for cutting the above nonmetal materials.
100W can cut acrylic up to 20mm, MDF up to 8mm. Other materials depends on it is easy for cutting or not.
1. Specially used for nonmetal
2. Clean cutting edge, no need polish
3. Suitable for engraving and cutting,dual use.
1.100W cuts acrylic up to 20mm and MDF 8mm. It is also suitable for engraving on many nonmetal materials. Before you want to take a 100W laser machine,please confirm all your requirements.
2. Laser cutting machine 100W has working size 1300mm*900mm,1300mm*2500mm and other sizes. You need to confirm the working size you need.
1. Send inquiry with your requirements.
2. Get quotation
3. Talk about details
4. Confirm order and arrange payment
5. Production
6. Delivery
7. Installation and operating
8. After sale service
It is not expensive, many factories can afford one set.
The cost depend on the working size, about USD3000 to USD6000.
1. Clean cutting edge no need polish.
2. Affordable price.
3. Optional working sizes for your requirements.
4. Engraving and cutting,multi use.
The acrylic cut by CNC router need to be polished,while the acrylic cut by laser machine no need polish.
The cutting speed of laser machine is faster.
XDLASER produce laser cutting machines since 2007. They offer whole life technical support.
How Long Does Laser Cutting Machine 100W Last?
One machine can last 7-8 years. One laser tube can use 2-3 years.
1, Observe the general safety operation rules of cutting machine. Start the laser strictly according to the laser start-up procedure.
2. the operator shall be trained, familiar with the structure and performance of the equipment and master the relevant knowledge of the operating system.
3. wear labor protection articles as required, and wear protective glasses that meet the requirements near the laser beam.
4. before it is clear whether a material can be irradiated or heated by laser, it is not processed to avoid potential danger of smoke and steam.
5. the operator shall not leave the post or entrust the operator to be in charge when the equipment is started. If it is necessary to leave, the operator shall stop or cut off the power switch.
6. put the fire extinguisher in a place accessible to the person; When not processed, the laser or optical switch shall be turned off; Do not place paper, cloth or other flammable materials near unprotected laser beams.
When you operate the laser cutitng machine, you should always stay with the machine.
Normally 1-2 years. But the lifetime of the machine is 7-8 years.
info@xdlasers.com