You are here: Home » News » Fiber Laser Cutting Machine Blog » 12 Tips For Using Fiber Laser Cutting Machine For Carbon Steel 

12 Tips For Using Fiber Laser Cutting Machine For Carbon Steel 

Views: 0     Author: XDLASER     Publish Time: 2021-04-21      Origin: XDLASER

Inquire

12 Tips For Using Fiber Laser Cutting Machine For Carbon Steel 

Carbon steel is the mostly cut material for fiber laser cutting machine. Fiber laser cutting machine for carbon steel is widely used in advertising,sheet metal,automotive,tools and many other industries.There are some tips for helping you to use the fiber laser cutting machine for carbon steel properly.

Fiber Laser Cutting Machine Samples

Fiber Laser Sample (315)


1. When you get the fiber laser cutting machine, please read the user manual for machine and the user manual for Cypcut control software carefully. Please follow the safety rules for laser cutting machine. Please 1stly start the water chiller,2ndly check everything before open the laser source. Please keep the laser source with enough water chiller.

2. The operator should be welled trained. He also need to be clear about the machine structure and function of every parts. You can get free training from the fiber laser cutting machine factory. You need to know all the knowledge about fiber laser cutting machine operation.

3. When you are very near to the machine,please wear protect glasses to keep your eyes safe. If you do not wear protect glasses,the laser may do harm to your eyes.

4. If you do not sure your material can be cut by the machine or not, please do not cut directly. Please confirm with machine manufacturer.Please tell the thickness of the material at the same time.

5. You can not leave the machine more than 20meters when the machine is running. If you need to go to wash room, please stop the machine or let your workmate to take care of it. It is not safe to leave machine alone without a babysitter. It is a baby,please take good care of it.

6. Do not put materials easy to get fire near to the laser head,especially when the machine is running. Keep paper,wood and many things far from the laser machine please.

7. In case you find any problem on the machine,please stop the machine at once and check the problem. It is the same when you are driving a car. It is dangerous to drive a car with small problem.

8. Please keep the room for the fiber laser cutting machine clean,dry and no dust. Believe me, you can use the machine longer.

9. When you move the gas bottles, please be careful and avoid leaking problem. It is very dangerous to leak the gas, because laser is on fire. When open the gas bottle,you had better wear a mask.

10. At the beginning,please run the machine at lower speed. Be sure it is all ok before increase the speed.

11. Please keep sure your design is the same or smaller than the machine working size.

12. Keep the gas bottle with enough gas.

Please contact XDLASER for details.

XD Certificate

www.xdlasers.com

Whatsapp: +86-15169026664

Related Blogs
Laser Machine Blogs

QUICK LINKS

PRODUCTS

CONTACT US

Mob/Whatsapp: +86-15169026664
                          +86-15169026368
Skype:               juliali01
Tel: +86-531-85737929
Email: info@xdlasers.com
Add: No.26th Building, Feicui Qinghe, Licheng District, Jinan, Shandong, China
Copyright © Jinan Xundi Laser Equipment Co.,Ltd