Publish Time: 2022-01-18 Origin: XDLASER
The reason why the fiber laser cutter is widely popular in the sheet metal processing industry is that it has the advantages of high production efficiency, high cutting precision and low labor cost. However, there are exceptions. Many users reflect that the production efficiency of the machine is not as ideal as expected. How can this happen? Let's take a look at the reasons for the low production efficiency of the fiber laser cutting machine.
1. Nesting software is not used
The nesting software is not used for typesetting and cutting, but manual typesetting in the system and cutting in turn according to the blanking sequence of parts. This will result in a large number of leftover materials after plate cutting, low plate utilization, non optimization of cutting path, long cutting time and low production efficiency.
2. There is no automatic cutting process
There is no automatic cutting process and cutting parameter database in the system of optical fiber laser cutting machine. The cutting operator can only carry out drawing cutting manually by virtue of experience. Automatic perforation and automatic cutting cannot be achieved during cutting, and manual adjustment is required. In the long run, the efficiency of optical fiber laser cutting machine is naturally very low.
3. The cutting power does not match the actual cutting thickness
The corresponding optical fiber laser cutting machine is not selected according to the actual cutting. For example, it is actually necessary to cut 25mm carbon steel plate in large quantities, but a 6000W cutting equipment is selected. The equipment can cut 25mm carbon steel plate, but the cutting speed is slow, and the long-time cutting will increase the damage rate of lens consumables and even affect the focusing lens, It is recommended to select 8000w or 10000w power for cutting.
4. Improper cutting method
Cutting methods such as common edge, borrowing edge and bridging are not used in cutting metal plates. In this way, the cutting path is long, the cutting time is long, the production efficiency is very low, the consumption of consumables will increase, and the cost is high.
The above is the reason why the production efficiency of fiber laser cutting machine is reduced in the process of use, so we should solve these problems.
julia@xdlasers.com
Whatsapp: +86-15169026664